Stainless Steel Round Bar
Katrangan
Prosedur produksi:
unsur mentahan (C, Fe, Ni, Mn, Cr lan Cu), smelted menyang ingots dening AOD finery, panas mbalek menyang lumahing ireng, pickling menyang Cairan asam, polesan kanthi otomatis mesin lan Cut menyang bêsik.
Standar:
ASTM A276, A484, A564, A581, A582, EN 10272, JIS4303, JIS G 431, JIS G 4311 lan JIS G 4318
ukuran:
Hot-digulung: Ø5.5 kanggo 110mm
Dingin-digambar: Ø2 kanggo 50mm
palsu: Ø110 kanggo 500mm
Dawane normal: 1000 nganti 6000mm
Toleransi: h9&h11
Fitur:
Penampilan apik saka gloss produk cold-rolled
Kekuwatan suhu dhuwur sing apik
Pengerasan kerja sing apik (sawise ngolah magnet sing lemah)
Solusi negara non-magnetik
Cocog kanggo arsitektur, konstruksi lan aplikasi liyane
Aplikasi:
Bidang konstruksi, industri bangunan kapal
Bahan dekorasi lan papan reklame publisitas ruangan
Bus njero lan njaba packaging lan bangunan lan springs
Handrails, electroplating lan electrolyzing pendants lan panganan
Corrosion- lan abrasion-free kanggo syarat tartamtu saka macem-macem mesin lan hardware kothak
Informasi dhasar
Aplikasi umum
316 Grade Stainless Steel Round bar duwe macem-macem aplikasi, bisa dipotong, dibentuk & ditekuk, diulir, dibor lan dilas kanggo digunakake ing:
Aplikasi Marine
Lingkungan Kimia
Aksel & Poros
Panggangan & Grates
Layar
Panggangan Keamanan
Teknik Umum
Preparation lumahing lan Coatings
Ora kaya baja ringan, kimia baja tahan karat tegese proses lan cara kanggo nglindhungi lan ngrampungake 316 Grade Stainless Steel beda banget karo baja ringan.Umume permukaan permukaan kanggo stainless steel bakal ditrapake sacara mekanik (Poles) utawa kimia (Passivating).Rampung permukaan sing bener bakal duwe pengaruh gedhe ing kinerja lan tampilan stainless steel sampeyan.
Salah sawijining pertimbangan sing paling penting kanggo kinerja lan penampilan Stainless Steels yaiku kebersihan.Lumahing kudu katahan bebas saka partikel logam liyane utamané alloy utawa baja karbon.Kayu uga duwe rereged sing bakal ngrusak lan ngrusak baja tahan karat.
Kelas bar baja tahan karat
| sasmita | sasmita | Komponen kimia % | ||||||||||
| C | Cr | Ni | Mn | P | S | Mo | Si | Cu | N | Liyane | ||
| 301 | 1.431 | ≤0,15 | 16.00-18.00 | 6.00-8.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | ≤0.10 | - |
| 304 | 1.4301 | ≤0,07 | 17.00-19.00 | 8.00-10.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | - |
| 304L | 1.4307 | ≤0,030 | 18.00-20.00 | 8.00-10.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | - |
| 304H | 1.4948 | 0.04-0.10 | 18.00-20.00 | 8.00-10.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | - |
| 309 | 1.4828 | ≤0.20 | 22.00-24.00 | 12.00-15.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | - |
| 309S | * | ≤0.08 | 22.00-24.00 | 12.00-15.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | - |
| 310 | 1.4842 | ≤0.25 | 24.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1,50 | - | - | - |
| 310S | * | ≤0.08 | 24.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1,50 | - | - | - |
| 314 | 1.4841 | ≤0.25 | 23.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | 1.50-3.00 | - | - | - |
| 317 | * | ≤0.08 | 18.00-20.00 | 11.00-15.00 | ≤2.00 | ≤0,045 | ≤0,030 | 3.00-4.00 | ≤1.00 | - | 0.1 | - |
| 317L | 1.4438 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | ≤2.00 | ≤0,045 | ≤0,030 | 3.00-4.00 | ≤1.00 | - | 0.1 | - |
| 321 | 1.4541 | ≤0.08 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | Ti5(C+N)~0.70 |
| 321H | * | 0.04-0.10 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | Ti5(C+N)~0.70 |
| 347 | 1.455 | ≤0.08 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | Nb≥10*C%-1.10 |
| 347H | 1.494 | 0.04-0.10 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | Nb≥10*C%-1.10 |
| 409 | S40900 | ≤0.03 | 10.50-11.70 | 0.5 | ≤1.00 | ≤0,040 | ≤0,020 | - | ≤1.00 | - | ≤0,030 | Ti6(C+N)~0.50 Nb:0.17 |
| 410 | 1Cr13 | 0.08-0.15 | 11.50-13.50 | 0.75 | ≤1.00 | ≤0,040 | ≤0,030 | - | ≤1.00 | - | - | - |
| 420 | 2Cr13 | ≥0.15 | 12.00-14.00 | - | ≤1.00 | ≤0,040 | ≤0,030 | - | ≤1.00 | - | - | - |
| 420J2 | 3Cr13 | 0.26-0.35 | 12.00-14.00 | - | ≤1.00 | ≤0,040 | ≤0,030 | - | ≤1.00 | - | - | - |
| 430 | 1Cr17 | ≤0.12 | 16.00-18.00 | - | ≤1.0 | ≤0,040 | ≤0,030 | - | ≤1.0 | - | - | - |
| 416 | Y1Cr13 | ≤0,15 | 12.00-14.00 | 3) | ≤1.25 | ≤0,060 | ≥0.15 | - | ≤1.00 | - | - | - |
| 444 | S44400 | ≤0,025 | 17.50-19.50 | 1 | ≤1.00 | ≤0,040 | ≤0,030 | 1.75-2.5 | ≤1.00 | - | 0.035 | Ti+Nb:0.2+4(C+N)~0.80 |
| 446 | S44600 | ≤0.20 | 23.00-27.00 | 0.75 | ≤1.5 | ≤0,040 | ≤0,030 | 1.50-2.50 | ≤1.00 | - | ≤0.25 | - |
| 431 | 1Cr17Ni2 | ≤0.20 | 15.00-17.00 | 1.50-2.50 | ≤1.00 | ≤0,040 | ≤0,030 | - | ≤0,80 | - | - | - |
| 630 | 17-4PH | ≤0,07 | 15.00-17.50 | 3.00-5.00 | ≤1.00 | ≤0,035 | ≤0,030 | - | ≤1.00 | 3.00-5.00 | - | Nb 0.15-0.45 |
| 631 | 17-7PH | ≤0.09 | 16.00-18.00 | 6.50-7.50 | ≤1.00 | ≤0,035 | ≤0,030 | - | ≤1.00 | ≤0,50 | - | Al 0,75-1,50 |
| 632 | 15-5PH | ≤0.09 | 14.00-16.00 | 3.50-5.50 | ≤1.00 | ≤0,040 | ≤0,030 | 2.00-3.00 | ≤1.00 | 2.5-4.5 | - | Al 0,75-1,50 |
| 904L | N08904 | ≤0.02 | 19.0-23.0 | 23.0-28.0 | 4.0-5.0 | ≤0,045 | ≤0,035 | ≤1.00 | 0.1 | Cu: 1.0-2.0 | ||
